Huber worldwide

Select your Region and Language
Worldwide
Worldwide
Europe
Germany
France
Great Britain
Spain
Switzerland
Sweden
Finland
Norway
Czech
Russia
Poland
Hungary
North America
USA
Australia
Australia
South and Central America
Mexico
Chile
Peru
Brazil
Asia and Middle East
Turkey

Plant for mono-incineration of sewage sludge in Hannover-Lahe: HUBER Disc Dryers successfully lifted in

18.11.2021 Hanover-Lahe,
Germany
Another milestone in the Hannover-Lahe project of sludge2energy GmbH

The two HUBER Disc Dryer RotaDry® units 2050 M were successfully lifted into place in calendar week 44. A crane unloaded the two disc dryers from the heavy load transporters on site and lifted them directly into the building onto the prepared level. The disc dryers, each weighing around 63 tonnes, are used in the Hannover-Lahe sewage sludge mono-incineration plant (KVA) as pre-dryers for fuel preparation.

Thermal drying for further utilisation of the sewage sludge: environmentally friendly heat for around 5,000 households

Thermal drying ensures that the dewatered sewage sludge is dried to such an extent that it can be utilised autothermally (i.e. without external heat or energy input) in the fluidized bed incinerator. The steam generated in the boiler is used both to produce electricity to cover the plant's own electrical needs and to heat the dryers. The vapours produced (steam) are condensed in a vapour condenser, the resulting heat is used to feed the district heating network. The environmentally friendly heat is then available to around 5,000 households.

After dryer insertion: steel construction, mechanical assembly and commissioning in 2022

After the dryers have been lifted into place, the steel construction above the dryers can now continue, and the roof of the building will be closed at the beginning of next year. Subsequently, mechanical assembly will start by the third quarter of 2022, followed by commissioning of the entire plant. HUBER, in cooperation with its subsidiary and the general contractor of the overall project, sludge2energy GmbH, is thus building a modern and efficient plant for sewage sludge recycling that meets the highest standards.

Another heavy load lifting manoeuvre: fluidized bed furnace S2E-Fluidizer, followed by insertion of the steam turbine

Lifting in of another heavy load component followed directly in calendar week 46: The S2E-Fluidizer, the fluidized bed furnace developed by S2E and the heart of the combustion concept, was already completed on site and lifted into place at the plant. In calendar week 47, installation of the steam turbine will take place.

Contact

If you have any questions, please do not hesitate to contact us!

We welcome your enquiries and want to offer you the best possible support for your projects.

  Search   Contact   Request